Kenwood BM230, Инструкция по эксплуатации, Страница: 6 / 21

key
1
lid handles
2
viewing window
3
pan hook
4
heating element
5
bread pan handle
6
kneader
7
drive shaft
8
drive coupling
9
on/off switch
bk
measuring cup
bl
dual measuring spoon 1tsp & 1tbsp
bm
control panel
bn
display window
bo
menu button
bp
crust colour button
bq
delay timer buttons
br
loaf size button
bs
start/stop button
bt
program start indicator light
ck
loaf size indicators
cl
crust colour indicators (light, medium, dark)
how to measure ingredients (refer to
illustrations 3 to 7)
It is extremely important to use the exact measure of
ingredients for best results.
●
Always measure liquid ingredients in the see-through
measuring cup with graduated markings provided.
Liquid should just reach marking on cup at eye level,
not above or below (see 3).
●
Always use liquids at room temperature, 20ºC/68ºF,
unless making bread using the rapid cycles (6) & (7) .
Follow the instructions given in the recipe section.
●
Always use the measuring spoon provided to measure
smaller quantities of dry and liquid ingredients. For 1tsp
or 1tbsp, fill to the top and level off the spoon (see 6).
9
on/off switch
Your Kenwood breadmaker is fitted with an ON/OFF
switch and will not operate until the “on” switch is
pressed.
●
Plug in and press the ON/OFF switch
9
situated on
the righthand side of the breadmaker - the unit will
beep and 1 (3:00) will appear in the display window.
●
Always switch off and unplug your breadmaker after use.
using your Bread Maker
(refer to illustration panel)
1 Remove the bread pan by holding the handle and
turning the pan to the back of the baking chamber.
2 Fit the kneader.
3 Pour the water into the bread pan.
4 Add the rest of the ingredients to the pan in the order
listed in the recipes.
Ensure that all the ingredients are weighed accurately
7 as incorrect measures will produce poor results.
8 Insert the bread pan into the oven chamber by
positioning the bread pan at an angle towards the
back of the unit. Then lock the pan by turning it
towards the front.
9 Lower the handle and close the lid.
10 Plug in and switch on - the unit will beep and default
to setting 1 (3:00).
11 Press the MENU button
bo
until the required program
is selected. The breadmaker will default to 900g &
medium crust colour.
12 Select the loaf size by pressing the LOAF SIZE
button
br
until the indicator
ck
moves to the required
loaf size.
13 Select the crust colour by pressing the CRUST button
bp
until the indicator
cl
moves to the required crust
colour (light, medium or dark).
14 Press the START/STOP button
bs
and the
PROGRAM START indicator light
bt
will come on. To
stop or cancel the program press the START/STOP
button
bs
for 2 -3 seconds.
15 At the end of the baking cycle unplug the breadmaker.
16 Use the hook supplied to lift up the pan handle.
17 Remove the bread pan by holding the handle and
turning the pan to the back of the baking chamber.
Always use oven gloves as the pan handle
will be hot.
18 Then turn out onto a wire rack to cool.
19 Leave the bread to cool for at least 30 minutes before
slicing, to allow the steam to escape. The bread will
be difficult to slice if hot.
20 Clean the bread pan and kneader immediately after
use (see care and cleaning).
3