10
troubleshooting guide
(continued)
PROBLEM
POSSIBLE CAUSE
SOLUTION
14. Kneader cannot
be removed.
15. Bread sticks to pan/
difficult to shake out.
16. Breadmaker not
operating/Kneader not
moving.
17. Ingredients not mixed.
18. Burning odour noted
during operation.
• You must add water to bread pan and
allow kneader to soak before it can
be removed.
• Can happen over prolonged use.
• Breadmaker not switched on
• Pan not correctly located.
• Did not start bread maker.
• Forgot to put kneader in pan.
• Ingredients spilled inside oven.
• Pan leaks.
• Exceeding capacity of bread pan.
• Follow cleaning instructions after use.
You may need to twist kneader slightly
after soaking to loosen.
• Lightly wipe the inside of bread pan
with vegetable oil.
• Refer to “Service and customer care”
section.
• Check on/off switch
is in the ON position.
• Check the pan is locked in place.
• Always make sure kneader is on shaft
in bottom of pan before adding
ingredients.
• Be careful not to spill ingredients when
adding to pan. Ingredients can burn on
heating unit and cause smoke.
• See “Service and Customer care”
section.
• Do not use more ingredients than
recommended in recipe and always
measure ingredients accurately
.
PAN PROBLEMS
MACHINE MECHANICS
Содержание BM150
