3
O
This appliance conforms to
EC Regulation 1935/2004
on materials and articles
intended to come into
contact with food.
Before using for the first time
1 Wash the parts: see ‘Cleaning’.
Key
1
Pushers: large and small
2
Feed tube
3
Lid
4
Shaft
5
Cutting plate
6
Sweeper
7
Body
8
Food outlet
9
Gearbox assembly
10
Extension chute
The cutting plates
available
The range of plates listed below
are included in pack and can
be identified by the numbers
marked on the plate as follows:-
Plate No 1
- extra fine shredding.
For parmesan cheese, chocolate
and nuts eg hazelnuts.
Plate No 2
- fine shredding. For
cheese, chocolate, nuts and firm
fruit or vegetables.
Plate No 3
- coarse shredding.
For cheese and firm fruit or
vegetables.
Plate No 4
- thin slice. For
cheese and firm fruit or
vegetables.
Plate No 5
- thick slice. For
cheese and firm fruit or
vegetables
Plate No 6
- thin (julienne style)
chipper. Cuts potatoes for super
thin French Fries and ingredients
for salads, casseroles and stir
fries (eg carrot, courgette and
cucumber)
Plate No 7
- standard chipper.
Cuts potatoes for thin French
Fries and ingredients for
casseroles and dips (eg
cucumber, apple and pear.)
Assembly and use
1 Remove the high speed outlet
cover
.
2 Fit the gearbox assembly onto
the mixer
.
3 Push the desired cutting plate
onto the shaft
. Each plate
is numbered for identification
and the number should be
uppermost when the plate is
pushed onto the shaft.
4 Fit the sweeper onto the shaft
, with the flat surface of the
sweeper against the plate.
O
For best results when using
the slicing/chipping plates,
the sweeper arm should be
positioned opposite the blade,
as shown below.
5 Attach the lid assembly to the
body, line up the
symbol
on the lid with
on the
body. Then turn to symbol
to lock into place
.
6 Fit the assembled attachment
onto the gearbox and turn to
lock into position
.
7 If required fit the extension
chute into the food outlet
and push firmly into place
.
The extension chute
MUST
be
fitted when the attachment is
used with the KM070/TYPE
KM08/TYPE KCC90 but can
also be used with all other
mixers to direct the food into
the collecting bowl.
8 Connect the mixer to the
power supply and place a
bowl under the food outlet.
9 Choose which feed tube
you want to use. The pusher
contains a smaller feed tube
for processing individual items
or thin ingredients.
