HPP-1-F, TECHNICAL SPECIFICATIONS
Electric Motor
10 HP
Hydraulic Pump
7.5 GPM
Tank Capacity
15 Gallons
Max Pressure
2000 PSI
Electrical
Standard Motor options for Kentmaster Power Unit HPP-1-F:
-
220/380v -3 phase - 50 Hz – 10 HP – 1725RPM
-
208/230/416/460v – 3 phase – 60Hz – 10 HP – 1725RPM
See Wiring Diagrams (Figure 3).
Control Panel:
-
110V/220V – Single Phase
See Wiring Diagrams (Figure 3).
Hydraulic
Hydraulic Tank Capacity: 15 Gallons
Maximum line pressure: 2000 PSI
Kentmaster recommends hydraulic oil Mobile DTE-24
MOBILE DTE-24
ISO GRADE
32
VISCOSITY, ASTM D 445
cSt @ 40 C 31.5
cSt @ 100 C 5.29
VISCOSITY INDEX, ASTM D 2270
98
SPECIFIC GRAVITY @ 15.6C / 15.6C, ASTM D1298
0.871
COPPER STRIP CORROSION ASTM D 130, 3 HRS @ 100C
1B
RUST CHARACTERISTICS PROC B, ASTM D 665
PASS
POUR POINT, C, ASTM D 97
-27
FLASH POINT, C, ASTM D 92
220
FZG 4-SQUARE LOAD SUPPORT, DIN 51354, FAIL STAGE
12
FOAM SEQUENCE I, II, III, ASTM D 892, ML
20/0
Air supply
Min air pressure required for ELECTRIC/AIR PRESSURE SWITCH (# 200905) is 67 PSI.
