REV C: 06/06/18
Figure
6
ROTOR ASSEMBLY, 5HP
Rotor- Shaft – Impeller Assembly (Item 1600660) has to be balanced.
MOTOR DISASSEMBLY AND REASSEMBLY PROCEDURE
1. RODS (ITEM 1600700) ARE ASSEMBLED TO BELL. AVOID HITTING WINDINGS OF STATOR WITH LOOSE
ENDS OF RODS.
2. USING A GEAR PULLER, PULL HOUSINGS (ITEMS 4 AND 6, FIG. 4) FROM SHAFT (ITEM 8, FIG 4)
3. PULL STATOR (ITEM 1, FIG. 4) OUT OF SHELL (ITEM 9, FIG.4). (APPLYING HEAT (ABOUT 200° F, 93° C) TO
SHELL WILL EXPAND IT. STATOR WILL BE EASIER TO REMOVE.
TO REASSEMBLY MOTOR REVERSE STEPS 1 TO 3.
KENTMASTER MFG. CO., INC.
1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016
UNITED STATES OF AMERICA
TELEPHONE: (626) 359-8888 FAX: (626) 303-5151
9 OF 27
1600660: ROTOR ASSEMBLY, 5 HP
ITEM
PART #
DESCRIPTION
QTY
1
1600730
IMPELLER
1
2
1600650
SHAFT
1
3
2340600
ROTOR
1