KENTMASTER 210-J, Руководство по эксплуатации

Страница: 16 / 27

REV C: 06/06/18
1302531: SAW MANDREL NOSE ASSEMBLY,
HIGH TORQUE
ITEM PART # DESCRIPTION QTY
1 1001780 GASKET 1
2 1300190 SAW MANDREL 1
3 1300200 COVER 1
4 1301580 PLUG 1
5 1301590 LUBE PLUG 1
6 1301620 RING 1
7 1302600 BEVEL GEAR, HIGH TORQUE 1
8 1302390 NOSE - SAW MANDAREL 1
9 1302520 COLLAR BEARING 1
10 3124000 BEARING 1
11 3134060 BEARING 1
12 5100390 RETAINING RING 1
13 5100750 RETAINING RING 1
14 7000010 PLUG 1
15 7016100 LUBE FITTING 1
16 7681470 O-RING 1
17 7701250 O-RING 1
18 8209040 SCREW 6
19 8603050 SQUARE KEY 1
Figure 13 1302531: NOSE ASSEEMBLY – HIGH TORQUE
KENTMASTER MFG. CO., INC.
1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA
 TELEPHONE: (626) 359-8888 FAX: (626) 303-5151
16 OF 27
HIGH TORQUE GEAR SET:
1302610 – BEVEL PINION GEAR (SEE 1302552)
1302600 – BEVEL GEAR (SEE NOSE 1302531)
BLADE: 1000 RPM
NOSE DISASSEMBLY:
4. Remove six screws (Item 18).
5. Using a 3/16” hex wrench, remove plug (Item
14)
6. With a center punch inserted thru back of nose
(Item 8), press out mandrel (Item 2). All
internal parts should come out at this time.
NOSE REASSEMBLY:
3. Reassemble all parts in reverse order.
4. Refer to Fig. 16 for proper assembly
orientation of ring and bearing (Items 6 and
Item 11).