KENT S400A, Руководство пользователя

Страница: 6 / 8

the end of the air filter following the instructions on the poly bag the parts are in.
Arrow on filter
MUST point towards machine. Connect air line to nipple.
Diagram #2
8. Regulator is preset to 125 P.S.I. DO NOT ALTER SETTING.
9. DO NOT operate this machine if there are any signs of damage, leakage or
failure.
10. The end of the siphon tube has a special filter on it. This filter should only be
removed for cleaning.
11.
The compression fitting for the siphon tube has been installed facing to the front
of the machine. To change position, hold the fitting using a 1” or adjustable
wrench and tighten the compression fitting (using a 9/16” wrench) to the desired
position that you would like the siphon tube to enter the compression fitting from.
(Diagram) #3 This will depend on where you locate your drum or bucket. Then
attach the siphon tube and tighten nut.
Diagram #3
12. Place the other end of the siphon tube (with filter) inside the bulk container.
SEE START UP BEFORE CONTINUING.