KENT S400A, Руководство пользователя

Страница: 5 / 8

#3. ASSEMBLING THE KWIK & EZ FILLER MACHINE TO
TABLE
( If you are supplying your own table or stand go to #5 at this time.)
1. Unpack the Kwik & EZ unit. Inspect for any damage that could have occurred
during shipping.
2. Remove tabletop and set aside.
3. Place the Kwik & EZ Filler Machine on the table, matching the four holes of the
Kwik & EZ Filler Machine with the corresponding four holes of the table.
4.
Using the four bolts and washer provided secure the Kwik & EZ to the tabletop.
5. THIS MACHINE MUST BE GROUNDED BY A LICENSED
ELECTRICIAN BEFORE YOU CONTINUE.
FAILING TO DO THIS
WILL CAUSE AN UNSAFE CONDITION AND COULD CAUSE INJURY
OR DEATH.
6. Connect the ground cable to the container of chemical you are using. Clamp needs
a bare metal connection.
You will need to reconnect the ground every time
you change the container . (Diagram #1)
Diagram #1
7.
Install the air filter and nipple provided on to the elbow at the top of the machine.
(Diagram #2) Do this at the same time you install your quick connect nipple on to