KENT Logfire II, Инструкция по установке и эксплуатации

Страница: 1 / 16

INSTALLATION & OPERATING
INSTRUCTIONS
Inbuilt & Insert Wood Fires
CONTENTS
General Information........................................1
Specifications...............................................3
Installation..........................................3-7
Inbuilt Zero Clearance Box Installation.......8-9
Operation...............................................9-11
Maintenance........................................12
Replacement Parts..................................13-14
Warranty.................................................15
1. This fire must be installed by a trained wood fire installer, ideally registered with the
New Zealand Home Heating Association. Do not allow any makeshift or compromising
installation methods as this could result in a house fire. Built in Kent wood fires must be
installed according to these instructions.
2. A Building Consent from the Local Authority must be obtained before installing this wood
fire, and we suggest that the Insurance Company covering building insurance be advised
of the installation.
3. Kent built in wood fires, when installed according to these instructions, comply with the
provisions of AS/NZS 2918-2001 “Installation of Domestic Solid Fuel Burning Appliances,
including appendix F”.
4. The clearances given in these instructions are necessary to prevent overheating of nearby
combustibles and drying out of the house structure. They may not be reduced without
authorisation.
5. Important: Read all instructions carefully before starting installation. Failure to follow these
instructions could result in a fire hazard, and may void warranty.
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Important: the installer or seller must leave these instructions with the purchaser
GENERAL INFORMATION