KENT KWF295-6937, Инструкция по установке и эксплуатации

Страница: 1 / 16

INSTALLATION & OPERATING
INSTRUCTIONS
Inbuilt & Insert Wood Fires
CONTENTS
General Information........................................1
Testing & Approvals.........................................3
Installation..........................................3-7
Inbuilt Zero Clearance Box Installation.......8-9
Operation...............................................10-11
Maintenance........................................12
Replacement Parts..................................13-14
Warranty.................................................15
1. This fire must be installed by an approved installer, ideally registered with the New
Zealand Home Heating Association. Do not allow any makeshift or compromising
installation methods as this could result in a house fire. This Kent wood fire must be
installed according to these instructions.
2. A Building Consent from the Local Authority must be obtained before installing
this wood fire, and we suggest that the Insurance Company covering building
insurance be advised of the installation.
3. This Kent wood fire, when installed according to these instructions, complies with
the provisions of AS/NZS 2918-2001 “Installation of Domestic Solid Fuel Burning
Appliances”.
4. The clearances given in these instructions are necessary to prevent overheating
of nearby combustibles and drying out of the house structure. They may not be
reduced without authorisation.
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Important: the installer or seller must leave these instructions with the purchaser
GENERAL INFORMATION