REAR REFLECTOR MOUNT ON SEAT POST
First attach the reflector to the bracket with the reflector screw, see the top
diagram. Next, remove the clamp screw and open the clamping reflector
bracket. place clamping reflector bracket around the seat post. If the clamp
is too loose, insert the shim inside the clamp. Tighten the clamp screw to hold
the reflector assembly in place. Finally adjust the reflector assembly in place
and ensure that it is upright and facing away from the brike.
REAR REFLECTOR MOUNT ON SEAT STAY BRACKET
First insert one washer onto the hex bolt and insert hex bolt through the reflector
bracket and then through the seat stay bridge bracket. Next, insert a second washer
onto the bolt and thread a hex nut onto the bolt behind the seat stay bridge bracket.
Tighten bolts until snug. Finally adjust the reflector assembly in place and ensure that
it is upright and facing away from the brike.
CAUTION: Be sure the reflector is vertical to the ground. If the reflector is aimed up or
down, oncoming headlights may not reflect properly in the reflector.
CAUTION: Be sure the reflector is vertical to the ground. If the reflector is aimed up or
down, oncoming headlights may not reflect properly in the reflector.
27
Содержание BMX
Страница 1: ...BMX FREESTYLE BIKE ASSEMBLY ...
Страница 6: ......
Страница 7: ...FREESTYLE PARTS IDENTIFICATION ...