2
9097698000(1)2008-04
Razor™ Plus D24 - D28 - C28
ENGLISH
INSTRUCTIONS FOR USE
INTRODUCTION
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Before carrying out any procedure on the machine, the operators and qualiied technicians must read this Manual carefully. Contact
Kent in case of doubts concerning the interpretation of the instructions and for any further information.
TARGET
This Manual is intended for operators and technicians qualiied to perform the machine maintenance.
The operators must not perform procedures reserved for qualiied technicians.
Kent will not be responsible for damages coming from the non-observance of this prohibition.
HOW TO KEEP THIS MANUAL
The Instructions for Use Manual must be kept near the machine, inside an adequate case, away from liquids and other substances
that can cause damage to it.
IDENTIFICATION DATA
The machine model and serial number are marked on the plate (34).
The machine production year is indicated by the irst two igures of the machine serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identiication data.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................
OTHER REFERENCE MANUALS
Electronic battery charger Manual, to be considered as integral part of this Manual
Moreover, the following Manuals are available:
Service Manual (that can be consulted at Kent Service Centers)
Spare Parts List (supplied with the machine)
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed by qualiied personnel or by Kent Service Centers.
Only original spare parts and accessories must be used.
Contact Kent for service or to order spare parts and accessories, specifying the machine model and serial number.
CHANGES AND IMPROVEMENTS
Kent constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such beneits to the machines that were previously sold.
Any change and/or addition of accessory must be approved and performed by Kent.
OPERATION CAPABILITIES
These scrubber-dryers are used to clean (scrubbing and drying) smooth and solid loors, in civil or industrial environment, under
safe operation conditions by a qualiied operator.
The scrubber-dryer cannot be used for moquette and carpet cleaning.
CONVENTIONS
Forward and backward, front and rear, left and right references are intended with the operator in driving position with the hands on
the handlebar (2).
–
–
–
https://harrissupplyind.com - To Order Parts Call 608-268-8080
Содержание 9087250020
Страница 2: ...h t t p s h a r r i s s u p p l y i n d c o m T o O r d e r P a r t s C a l l 6 0 8 2 6 8 8 0 8 0 ...
Страница 107: ...h t t p s h a r r i s s u p p l y i n d c o m T o O r d e r P a r t s C a l l 6 0 8 2 6 8 8 0 8 0 ...
Страница 108: ...h t t p s h a r r i s s u p p l y i n d c o m T o O r d e r P a r t s C a l l 6 0 8 2 6 8 8 0 8 0 ...
