INSTRUCTIONS FOR USE
Razor Blade 26D/28D – Razor Blade 28C
—
909 6457 000(1)2006-01
3
SAFETY
The following symbols indicate potentially dangerous
situations. Always read this information carefully and take all
necessary precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent
injury. No accident prevention program is effective without the
total cooperation of the person responsible for the machine
operation. Most of the accidents that may occur in a factory,
while working or moving around, are caused by failure to
comply with the simplest rules for exercising prudence. A
careful and prudent operator is the best guarantee against
accidents and is essential for successful completion of any
prevention program.
SYMBOLS
GENERAL INSTRUCTIONS
Specific warnings and cautions to inform about potential
damages to people and machine are shown below.
–
Disconnect the batteries before performing any
maintenance/repair procedure.
–
This machine must be used by properly trained and
authorized personnel only. Children or disabled people
cannot use this machine.
–
Keep the battery far from sparks, flames and
incandescent material. During the normal operation
explosive gases are released.
–
Do not wear jewels when working near electrical
components.
–
Do not work under the lifted machine without supporting
it with safety stands.
–
Do not operate the machine near toxic, dangerous,
inflammable and/or explosive powders, liquids or
vapours.
–
Battery charging produces highly explosive hydrogen
gas. Keep the tank assembly open during battery
charging and perform this operation in well-ventilated
areas and away from naked flames.
–
Carefully read all the instructions before carrying out any
maintenance/repair procedure.
–
To reduce the risk of fire, electric shock, or injury, do not
leave the machine unattended when it is plugged in.
Unplug the machine from the outlet when not in use and
before servicing.
–
To avoid electric shock, do not expose to rain. Store the
machine indoors.
–
Do not allow to be used as a toy. Close attention is
necessary when used near children.
–
Use only as described in this Manual. Use only KENT's
recommended accessories.
–
Do not use with damaged power supply cable or plug. If
the machine is not working as it should, has been
damaged, left outdoors or dropped into water, return it to
the Service Center.
–
Do not pull or carry the machine by the supply cable;
never use the power supply cable as a handle. Do not
close a door on the supply cable, or pull the supply cable
around sharp edges or corners. Do not run the machine
on the supply cable. Keep the supply cable away from
heated surfaces.
–
Take all necessary precautions to prevent hair, jewellery
and loose clothes from being caught by the machine
moving parts.
–
Do not smoke while charging the batteries.
–
Do not leave the machine unattended without being sure
that it cannot move independently.
–
Do not use the machine on slopes with a gradient
exceeding the specifications.
–
Do not wash the machine with direct or pressurized
water jets, or with corrosive substances.
–
Do not use the machine in particularly dusty areas.
–
While using this machine, take care not to cause
damage to other people, especially children.
–
Do not put any can containing fluids on the machine.
–
The storage temperature must be b32°F and
+104°F (0°C and +40°C).
–
The machine working temperature must be between
+32°F and +104°F (0°C and +40°C).
–
The humidity must be between 30% and 95%.
–
Always protect the machine against the sun, rain and
bad weather, both under operation and inactivity
condition.
–
Do not use the machine as a means of transport.
–
Do not use the machine on slopes with an inclination
higher than 16%.
DANGER!
It indicates a dangerous situation with risk of
death for the operator.
WARNING!
It indicates a potential risk of injury for people.
CAUTION!
It indicates a caution or a remark related to
important or useful functions. Pay particular
attention to the paragraphs marked by this
symbol.
NOTE
It indicates the necessity to refer to the
Instructions for Use Manual before performing
any operation.
DANGER!
WARNING!
