Technical Information
Packaging:
Plastic case and foam inlay
Voltage:
2.4V
Power:
12.75W/17W
Battery pack:
2x 1.2V / 4.5 A / NiMh
Power supply:
12V DC / 0.5 A
Charging time:
max. 5h
Working time:
ca. 300 staples at 17W
and fully loaded
Weight of the Plastic Stapler:
220 g
Material of the staples:
Stainless steel 302
Custom Tariff Code:
85151100
Spare parts available on request
MINI STAPLER KIT
DS678
In order to provide you with the most appropriate Personal Protective Equipment when using our products, KENT advises that you follow the
guidelines on the packaging of the product before use. The guidelines are there for your protection and KENT provides a range of Personal
Protection Equipment such as clothing, eye glasses, goggles, face shields and breathing apparatus, complying with the latest European
legislation. If you require further advice then please phone our freephone number and we will be pleased to help you. Telephone: 0800 136925
Process Centre: KENT UK, Pitreavie Crescent, Pitreavie Business Park, Dunfermline
Fife KY11 8UQ Tel : Freephone 0800 136925 or 01383 737393 between 08:30-17:30
Monday-Thursday, 09:00-15:00 on Fridays’. For out of hours queries please Fax us on
01383 735829 or Email: [email protected]
Terms and Conditions
No part of this publication may be reproduced
transmitted or stored, electronically, mechanically or
photocopied without the prior permission of KENT UK.
This data sheet and its contents (the "Information")
belong to KENT UK or are licensed to it. No licence
is granted for the use of it other than for information
purposes in connection with the products to which
it relates. No licence of any intellectual property
rights is granted.
The Information is subject to change without notice
and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate
but the business assumes no responsibility for its
accuracy or completeness, any error from or omission
in it nor for any use made of it. Users of this data sheet
should check for themselves the Information and the
suitability of the products for their purpose and not
make any assumptions based on information included
or omitted. Liability for loss or damage resulting from
any reliance on the Information or use of it (including
liability resulting from negligence or where the business
was aware of the possibility of such loss or damage
arising) is excluded. This will not operate to limit or
restrict the business liability for death or personal injury
resulting from its negligence.
Registered Office: Berner UK Limited
Amber House, Showground Road
Bridgwater, Somerset,
United Kingdom
TA6 6AJ
All rights reserved.
Health & Safety Information
The product is not subject to identification regulations under EC Directives and the Ordinance on
Hazardous Materials.
Mini Stapler is in compliance with the directives 2004/108/CE - 2006/42/CE - 2006/95/CE and the
following standards apply: EN50063 - EN50199
Content of the kit
1x Mini Stapler
1x 12V charger
1x Assortment box (empty: 86282-00)
1x leaflet with instructions for use
20x W-staples 0,6mm (per 100: 86037-00)
20x W-staples 0,8mm (per 100: 86038-00)
20x S-staples 0,6mm (per 100: 86039-00)
20x S-staples 0,8mm (per 100: 86040-00)
20x V-staples 0,8mm (per 100: 86041-00)
20x double M-staples 0,8mm (per 100: 86279-00)
20x double V-staples 90
°
0,8mm (per 100: 86280-00)
20x large W-staples 0,8mm (per 100: 86358-00)
