DUMMY
POSITION
E
a).FINE HAND FEED
8
--·--·---,.
D
F
fig-25
1. Turn the feed rate selector (A) to any of the t·rn "f>ummy"
position.
2. Engage Feed Trip Lever (8).
3. The Qui 11 is now under hand�·hee I contro I.
b). PONEA FEED
Maximum looding ]" (25mm) dia solid drill in steel.
l. Ensure qui 11 rock is off, (C).
2. Set micrometer dia to required depth, (D).
3. Engage feed Clutrh Selector, (£).
4. Select feed rate, (A).
5. -Engage feed trip lever, (B).
6. The feed wi 11 automatically trip out
at a depth within 0.2mm (±0.01").
NOTE: To interrupt Power Feed, just press down the dis-engageme
lever (F).
- 28-
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
