3 • 1 0 Sw I v e I t o ho r I z on t a I ( s e t ho r f z on t a I a r b or )
1. Remove the positioning taper pin from top of the swivel base.
2. Use spanner and unlock 4 bolt on top of column (Fig 15-1).
3. Swivel base to the correct position (Fig 15-2).
4. Insert the positioning taper pin.
5. Locking the 4 bolts, but do not tighten.
6. Set the long arbor then push two arbor support into arbor.
7. Tighten the taper pin and 4 bolts.
3-11 Parts name of machine
1. Spindle motor.
2. Milling head.
3. Control panel.
4. X axis servo motor.
5. Rpm indication for spindle.
6. Y axis clamp lever.
7. Knee handle.
8. Z axis clamp lever.
9. X axis clamp lever.
10. Y axis hand wheel.
11. X axis hand wheel.
12. Horizontal spindle speed selection lever.
Fig-16
- 20-
Property
of
Kent
Industrial
USA
Do
Not
Reproduce
