Kent-Moore J-46079, Руководство пользователя

Страница: 10 / 14

10
Power:
Solid green when
power is available.
Ready, Standby or
Fault:
Solid green when
battery is ready.
Flashing yellow if
battery is on standby.
Solid yellow if a
battery is rejected.
Charging:
Solid yellow when
battery is charging.
NiCD/NiMH*
Charging the Battery
Insert the battery into the charger. When the battery is inserted, the charging
system begins the rapid charge cycle. When this cycle is completed, the
"READY" indicator on the Battery Status Display turns solid green, and the
battery is charged to approximately 95% of its rated capacity. To attain 100% of
its capacity the battery should remain in the charger for 3 hours. A charged
battery may be stored in the charger indefinitely.
Upon completion of the charging cycle, the charger switches to "Maintenance
Mode" where it maintains the battery at 100% of its rated capacity.
CAUTION: Do not charge a battery that is below 0°C (32°F). Allow the battery to
warm up to room temperature before charging.
Note: The operating temperature of the device is 0°C (32°F) - 50°C (131°F).
Charge batteries at room temperature 20°C - 25°C (68°F - 77°F). Batteries that
are charged in conditions that are above or below room temperature will exhibit
battery cycle life and capacity below their rated values. This also applies to the
temperature of the battery itself. Allow batteries that are below 20°C (68°F) or
above 25°C (77°F) to adjust to room temperature before charging.