5
Cleaning the
filters
The filters should be
periodically
checked and cleaned if
necessary. Frequency of cleaning
will vary with amount of use and
volume of dust collected.
WARNING: The performance of
the vacuum will be severely
compromised if the filters are not
regularly cleaned.
The filters must be
correctly fitted
before using the vacuum cleaner
again.
Filters should be hand washed in
warm water only and allowed to
air dry.
Do not wash the filters in a
washing machine or dry them in a
dryer.
Do not use the filters while they are
wet.
This
will reduce the suction
power and damage the motor.
1. Press the outlet lock to open the
outlet cover, take out the outlet
filter.
2. Press the button of front cover to
open the dust bin, Take the HEPA
filter out from the dust bin,
Wash the cyclone assembly.
WARNING:
Only use water without detergent
when you wash the filters, the
cyclone assembly, the inlet cover
and the dust
collection container
.
Dry them throughly before use.
3. Replace the cyclone assembly
and the filter in the dust
container
.
When
you place the filter on the
cyclone
assembly, rotate the filter
until it
locks in position.
Make sure the parts are in correct
positions.
Carefully place the dust
collection
container
on the
vacuum cleaner
main body.
Gently push the dust
container
until it
clicks and locks in
position.
If the dust
collection container
does not click and lock, make sure
i
t
is aligned correctly.
•