![background image](http://html.mh-extra.com/html/kensington/vcm43a14v/vcm43a14v_instruction-manual_664427004.webp)
3
•
•
How to Use
Attaching the tools
To connect the hose, insert the
hose
end connector
into the hose
socket at the front of the vacuum
cleaner until it clicks.
To remove the hose, press the
button on the hose connector and
pull out the hose.
Connect the
adjustable
extension
tube to the curved end of the
hose. The shorter end of the tube
is connected to the hose.
Connect the other end of the
extension
tube to the floor
head.
Make sure the tool is attached
securely before use. You can
choose Hard Floor or Carpet
cleaning by pushing the selector
on the floor tool
(bristles
extended for hard floor)
.
Operation
Extend the power cable until you
see the yellow mark. Make sure
the red mark is not visible.
When cleaning is finished, turn off
the power, unplug and push the
cable retract button until the
cable has fully retracted.
T
ube length can
be adjusted by
pushing the unlock
button and sliding
the inner tube up
or down, release
button to lock in
position.
Note: Accessory holder can
be slid onto the extension
tube and
then
used to
support accessories.