31
Multi lighting applications
Wireless optical instruction
By using 2 or 3 flash units in SLAVE mode you can fulfil a number of
multi-lighting needs.
•
Using 2 SLAVE units in separate wireless flash groups.
Set mode in SLAVE c or SLAVE n accordingly by pressing the ‘left
clear’ button.
Set channel to 1, 2, 3 or 4 (all units must be on the same
channel) by pressing the ‘zoom’ button until the channel number
symbol flashes and using the left and right buttons to select a
number.
Set each SLAVE unit in its own group (e.g. first flashgun in group
A, second flashgun in group B) by pressing the ‘zoom’ button
until the group letter symbol flashes, then using the left and right
buttons to select a group.
Set the power output of each group to achieve the desired effect
Set the MASTER unit to [RATIO A:B] or [RATIO A:B C] (see page
23 for more information)
•
Using 3 SLAVE units in separate wireless flash groups.
Set mode in SLAVE c or SLAVE n accordingly by pressing the ‘left
clear’ button.
Set channel to 1, 2, 3 or 4 (all units must be on the same
channel) by pressing the ‘zoom’ button until the channel number
symbol flashes and using the left and right buttons to select a
number.
Set each SLAVE unit in its own group (e.g. first flashgun in group
A, second flashgun in group B, third flashgun in group C) by
pressing the ‘zoom’ button until the group letter symbol flashes,
then using the left and right buttons to select a group.
Set the power output of each group to achieve the desired effect
Set the MASTER unit to [RATIO A:B C] (see page 23 for more
information)
Before commencing shooting, press the test button on the MASTER
flash. If the SLAVE unit does not fire, please check the flash position
and distance and adjust accordingly.
Note: If you are using [RATIO A:B], SLAVE group C will not fire. If all
three SLAVE units are set to group A, they will all take the settings of
the MASTER flash.
