25
Multi wireless MASTER mode (Multi,
MASTER, Canon)
Press the ‘mode’ button to set your speedflash in Multi (stroboscopic)
mode, then press the ‘left clear’ button to enter MASTER mode. In
Multi mode, you can fire off a number of flashes in a very short space
of time, which is ideal for capturing moving objects such as sports
or wildlife. You can also set each SLAVE unit with a different flash
light ratio, using the MASTER unit to confirm all settings (SLAVE unit
model and MASTER unit model must be the same).
1. Press the ‘zoom’ button until
[RATIO] flashes on the screen
2. Use the left and right buttons to
select your flash ratio: [RATIO],
[RATIO A:B] or [RATIO A:B C]
[RATIO] means that all SLAVE
units will be triggered at the same
power as the MASTER unit. Once
the [RATIO] symbol stops flashing,
use the left and right buttons on the directional pad to select the
power output.
[RATIO A:B] means that the power output for groups A and B
can be adjusted independently.
[RATIO A:B C] can be used as [RATIO A:B] above, but all three
groups can have the power output adjusted independently.
3. Once you have selected your ratio, press the ‘set’ button until the
frequency flashes, then use the left and right buttons to choose
the frequency.
Press the ‘set’ button again until the number of flashes indicator
begins to flash, then use the left and right buttons to choose the
number of flashes (please refer to the table on page 17)
When you are happy with the number of flashes, press the ‘set’
button again. If you have selected [RATIO A:B] or [RATIO A:B
C], the symbol for group A will now begin to flash, and you can
use the left and right buttons to select the power output for that
group, and press ‘set’ to confirm your settings. Repeat for all
other groups.
