11
Install speedflash on camera
Make sure the speedflash and camera power are both off.
1. Prepare
Spin the lock dial fully to the left.
2. Install
Insert the speedflash’s foot completely into the camera’s hotshoe.
3.
Lock
Spin the lock dial back to the right to lock the speedflash into
place. Do not overtighten.
4.
Remove
Spin the lock dial to the left, and slowly remove the flash from
the hotshoe.
Never pull the speedflash out forcibly.
Turn on the power
Press and hold the ON/OFF button for two seconds to turn the
speedflash on or off.
In order to save battery power and avoid leakage, the default
settings are as follows:
Automatic power saving mode
If the speedflash is inactive for 60 seconds, the unit will automatically
go into sleep mode. If this occurs, press any button to wake it up. If
the speedflash is not going to be used for a long period of time, it is
recommended to turn it off using the main power switch and remove
the batteries. Always turn off the power before removing batteries.
When the flash is fully charged and ready to be triggered, the flash
indicator button will light up:
Before shooting, ensure that the flash charging and camera
viewfinder indicator lights are illuminated.
