11
Step 14
Insert the temperature gauge with bezel
through the mounting hole in the front of the
door. Place back plate and a hex nut onto
the temperature gauge stem from the inside
of the door panel and tighten it firmly.
Step 15
Place one end of the S-Hook around the
regulator neck or hose as shown.
Step 16
Using a set of pliers, crimp the S-hook
securely to the hose/regulator so that it can
not be removed from the assembly.
Step 17
When an LP tank is not attached to the
smoker, use the S-Hook to hang the
hose/regulator from the carry handle on the
side of the smoker. This will help prevent dirt
and other particles from plugging the end of
the assembly.
OR
