Power Supply Cord
AWARNING
••
Becbical Connection
DinectWire
AWARNING
Fire Hazard
Use a new UL listed 30 amp power supply cord.
Use a UL listed strain relief.
Disconnect power before making electrical connections.
Connect neutral wire (white or center wire) to center
terminal (sliver).
Ground wire (green or bare wire) must be connected to
green ground connector.
Connect remaining 2 supply wires to remaining
2 terminals (gold).
Securely tighten all electrical connections.
Failure to do so can result In death, lire, or
electrical shock.
1. Disconnect power.
2. Remove the hold-down screw and terminal block cover.
o
A
Neutral grounding
wire (green with yellow stripes)
B. External ground conductor
SCf8W
C.
Genter, silver-colored
terminal block screw
D. Terminal block cover snd hold-down
screw
Fire Hazard
Use to gauge solid copper wire.
Use a UL listed strain relief.
Disconnect power belore making electrical connections.
Connect neutral wire (white or center wire) to center
terminal (silver).
Ground wire (green or bare wire) must be connected to
green ground connector.
Connect remaining 2 supply wires to remaining
2 terminals (gold).
Securely tighten an electrical connections.
Failure to do so can result In death, fire, or
electrical shock.
3. Add strain relief.
Style 1: Power supply cord strain n!lie1
•
Remove the screws from a
y,"
(1.9 em) UL listed strain
reliel (UL maJ1<ing
on strain relie!). Put the tabs
01
the two
clamp sections into the hole below the terminal block
opening so that one tab is poin:ing up and the other is
pointing down, and hold in place. Assemble and tighten
strain relief screws just enough to hold the two clamp
sections together.
A
B
A
Strain relief tab
B. Clamp section
•
Put power supply cord through the strain relief. Be sure
that the black part of the power supply cord Is Inside the
strain relief. The strain relief should have a tight frt with the
dryer cabinet and be in a horizontal position.
