8
INSTALLATION INSTRUCTIONS
UNPACKING AND REMOVING SHIPPING MATERIAL
When removing the washer from the carton base, be sure
the plastic tub support comes off with the base.
If you must lay the washer down to remove the base
packaging materials, always protect the side of the
washer and lay it carefully on its side.
DO NOT
lay the
washer on its front or back.
1.
After removing the carton and shipping material, lift
the washer off the foam base. Make sure the plastic
tub support comes off with the base and is not stuck
to the bottom of the washer.
2.
Save the foam block (that contains the Use & Care
Guide, parts, water hoses and laundry product
samples) for future use. If the washer must be moved
in the future, this will help prevent damage to the
washer during transportation.
NOTE:
To prevent damage, do not remove the foam
block until the washer is at the final location.
Tub support
Carton Base
• Adjustable Pliers
• Carpenter’s Level
TOOLS YOU WILL NEED
• Adjustable Pliers
• Carpenter’s Level
TOOLS YOU WILL NEED
3.
Unfasten the power cord from the back of the washer.