Kenmore D02 M90225, Инструкция по использованию и уходу

Страница: 18 / 28

4
6
Grill Head
Machine Screws
Qty. 6
1/4-20x1/2"
A
Grill Head
□
This step requires two people to lift and position grill head onto card.
□
Cut tie wraps from regulator hose and remove styrofoam. Carefully lower the grill head onto cart,
making sure the regulator hose and side burner ignition wire are hanging outside cart. Rest the back
and front of grill head on tabs
protruding from front and rear legs as indicated by arrows in figure (A).
□
Open top lid, and use four 1/4-20x1/2" machine screws to attach grill head from inner firebox to
cart side braces as shown (B).
□
Use two 1/4-20x1/2" machine screws to attach grill head to the two rear legs as shown (C).
5
Tank Exclusion Brace
Machine Screws
Qty. 2
#8-32x3/8"
Tank Exclusion
Brace
□
Use two #8-32x3/8"machine screw to attach
tank exclusion brace to bottom shelf and front
panels as shown. Threaded tips (round hole)
attaches to front panel. Other tip (oblong hole)
attaches to bottom shelf.
18 · 466424712
C
B