Kenmore 796.405190, Руководство по обслуживанию

Страница: 13 / 59

12
A
POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press again to turn the
washer OFF.
NOTE:
Pressing the POWER button during a cycle will
cancel that cycle and any load settings will be lost.
The door will unlock after a brief pause unless the
water level or temperature is too high.
E
SPECIAL CYCLE AND OPTION BUTTONS
These buttons are used to activate special cycles or
options.
G
TIME AND STATUS DISPLAY
The display shows the estimated time remaining, load
size, cycle status, and door lock status.
F
DETERGENT AMOUNT INDICATOR
Bars light up to indicate the best amount of HE
detergent to use based on size of dry load sensed by
washer control. Indicator will not be accurate if any wet
clothes are placed in washer.
B
CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle. Once the
desired cycle has been selected, the standard presets
will be shown in the display. These settings can be
adjusted using the cycle setting buttons anytime before
starting the cycle.
C
START/PAUSE BUTTON
Press this button to start the selected cycle.
If the washer is running, use this button to pause the
cycle without losing the current settings.
NOTE :
If you do not press the START/PAUSE button
within 4 minutes of selecting a cycle, the washer
automatically turns OFF.
D
CYCLE MODIFIER BUTTONS
Use these buttons to adjust the desired cycle options
for the selected cycle. The lights above the buttons
show the current selection.
NOTE :
Not all settings are available on all cycle
selections.
H
DISPENSER
Dispenser drawer. This drawer contains the
compartments for detergent and additives.
H A
F E G
B C D