Kenmore 795.79012.901, Руководство по обслуживанию

Страница: 25 / 37

8-1-5 OFF Mode
1. For active this function you have to press the control button until the OFF mode led is ON. The OFF mode will take effect after
10 seconds.
2. When the OFF mode is active the compressor, the heater, water valve and the fans are inactive. Only the lamps (dispenser
and R/F lamps) and the display are active in normal operation (Door open: R/F lamps and display ON).
3. For disable the function you have to press the control button until the desired Control LED is ON and the “OFF LED” will
Be inactive. After 10 sec it will be a reset and the desired notch will be set.
4. If a Power Failure occur and the OFF MODE was active, it going to start in OFF MODE.
8-1-6 Lock Function
1. On initially operation the Lock Function is OFF.
2. If you wish lock the Water Dispenser, push on the WATER LOCK button, after this, the WATER LOCK LED on the Display will
be turned ON..
3. When the Dispenser Lock Function is active the Dispenser lamp don’t operate.
4. If you wish unlock the Water Dispenser, press the WATER LOCK button. Then the WATER LOCK LED on the Display will
Be turned OFF.
8-1-7 Filter Condition Display Function
1. There is a replacement indicator light for the water filter cartridge on the dispenser.
2. Water filter needs replacement once six months.
3. For reset the counter or turn OFF the filter change indicator press the lock button 3 sec and the counter will start from “0” and
The filter change indicator will be OFF.
4. If the power OFF the data will be save in the memory (Power saving mode).
- 25 -