17
USING YOUR REFRIGERATOR
SETTING THE CONTROLS
The refrigerator control functions as the thermostat for the
entire appliance (refrigerator and freezer sections). The
colder the setting, the longer the compressor will run to
keep the temperature colder. The freezer control adjusts
the cold air flow from the freezer to the refrigerator.
Setting the freezer control to a lower temperature keeps
more cold air in the freezer compartment to make it
colder.
• The Refrigerator Temp. Control ranges from 33°F to
46°F (0°C to 8°C).
Press the
Refrigerator Temp
button
to cycle through the available temperature settings one
increment at a time.
• The Freezer Temp. Control range is from -6°F to 8°F
(-21°C to -13°C).
Press the
Freezer Temp
button to
cycle through the available temperature settings one
increment at a time.
Ultra Ice
• When you press the
Ultra Ice
button, the LED will
illuminate in the display and will continue for 24 hours.
The function will automatically shut off after 24 hours.
• You can stop this function manually by pressing the
button one more time.
• This function increases both ice making and freezing
capabilities.
AIRFLOW
Cold air circulates from the freezer to the fresh food
section and back again through air vents in the wall
dividing the two sections. Be sure not to block vents while
packing your refrigerator. Doing so will restrict airflow
and may cause the refrigerator temperature to become
too warm or cause interior moisture buildup. (See air flow
diagram below.)
Temperature
CAUTION
To reduce the risk of scratching the door or breaking the
door mullion, please make sure that the refrigerator door
mullion is always folded in.
Caution When Closing the Door
Energy Saver
The
Energy Saver
function disables the mullion heater
located on the refrigerator door in order to conserve
electricity. Press and hold the
Energy Saver
button for
three seconds to activate or deactivate this function.
The
Energy Saver
function defaults to ON.
NOTE
: Discontinue using the
Energy Saver
function
if excessive moisture begins to collect on the door
mullion.
NOTE:
When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
and when ice cream is firm. If the temperature in either
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
Temperature Mode Switch Function (°F <->°C)
If you want to convert °F to °C or vice versa, press and
hold the
Freezer Temp
and
Refrigerator Temp
buttons at
the same time for approximately five seconds.
