background image

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

Save these instructions for future reference.

4

IMPORTANT INSTRUCTIONS FOR 

UNPACKING AND INSTALLATION
IMPORTANT - Read and follow the below 

instructions and precautions for unpacking, 

installing, and servicing your appliance:
Remove all tape and packaging before using 

the appliance. Destroy the carton and plastic 

bags after unpacking the appliance. Never 

allow children to play with packaging 

material. Do not remove the wiring label and 

other literature attached to the appliance. 

Do not remove model/serial number plate.
Cold temperatures can damage the elec-

tronic control. When using this appliance for 

the first time, or when the appliance has not 

been used for an extended period of time, be 

sure the appliance has been in temperatures 

above 32ºF (0ºC) for at least 3 hours before 

turning on the power to the appliance.
Never modify or alter the construction of the 

appliance by removing the leveling legs, 

panels, wire covers, anti-tip brackets/screws, 

or any other part of the appliance.
Be sure to have an appropriate foam-type 

fire extinguisher available, visible, and easily 

accessible located near the appliance.

GROUNDING INSTRUCTIONS

 - Avoid fire hazard or electrical 

shock. Failure to follow this warning may 

cause serious injury, fire, or death.

 - Avoid fire hazard or electrical 

shock. Do not use an adapter plug, use an 

extension cord, or remove grounding prong 

from the power cord. Failure to follow this 

warning may cause serious injury, fire, or 

death.

Proper Installation—Be sure your appliance is 

properly installed and grounded by a 

qualified technician.  In the United States, 

install in accordance with the National Fuel 

Gas Code ANSI Z223.1/NPFA No. 54, latest 

edition and National Electrical Code NFPA 

No. 70 latest edition, and local electrical 

code requirements. In Canada, install in 

accordance with CAN/CGA B149.1 and 

CAN/CGA B149.2 and CSA Standard C22.1, 

Canadian Electrical code, Part 1-latest 

editions and local electrical code require-

ments. Install only per installation instructions 

provided in the literature package for this 

appliance.
For personal safety, this appliance must be 

properly grounded. For maximum safety, the 

power cord must be securely connected to an 

electrical outlet or junction box that is the 

correct voltage, is correctly polarized and 

properly grounded, and protected by a 

circuit breaker in accordance with local 

codes.
It is the personal responsibility of the 

consumer to have the appropriate outlet or 

junction box with the correct, properly 

grounded wall receptacle installed by a 

qualified electrician. It is the responsibility 

and obligation of the consumer to contact a 

qualified installer to assure that the electrical 

installation is adequate and is in confor-

mance with all local codes and ordinances.
See the installation instructions packaged 

with this appliance for complete installation 

and grounding instructions.

Содержание 790.9262






































Отзывы: