10
Setting Oven Controls
Note:
The time of day
must
first be set in order to operate the oven.
To Set or Change the Temperature for Baking
The
Bake
Bake
pad controls normal baking. The oven can be programmed to bake at any temperature from 170° F to 550° F.
To Set the Controls for Normal Baking:
1. Arrange interior oven racks and place food in oven.
2. Press
Bake
Bake
pad,
"- - -"
will appear,
"UPPER"
or
"LOWER"
and
"BAKE"
will flash in the display.
3. Press
or
pad to set the desired temperature. The desired temperature will appear
"UPPER"
or
"LOWER"
and
"BAKE"
continue flashing in the display.
4. Wait 5 seconds.
"UPPER"
or
"LOWER"
and
"BAKE"
stop flashing and the oven icon will appear in the display. A
beep will sound once the oven temperature reaches the desired baking temperature.
Pressing
STOP
Clear
pad will cancel the Bake feature at any time.
To Change the Oven Temperature after Baking has Started:
1. After the oven has already been set to bake and the oven temperature needs to be changed, press
Bake
Bake
pad. "
- - - °
"
will appear,
"UPPER"
or
"LOWER"
and
"BAKE"
start flashing in the display.
2. Press
or
pad to increase or decrease the set temperature.
3. Wait 5 seconds.
"UPPER"
or
"LOWER"
and "
BAKE
" will stop flashing and remain in the display. A beep will sound
once the oven temperature reaches the desired baking temperature.
Note: If the oven was recently heated from prior cooking and has remained heated, the bake element symbol may not
show in the display immediately.
To Set Control for Continuous Bake or 12 Hour Energy Saving:
The
Timer
Set/Off
pad controls the Continuous Bake or 12 Hour Energy Saving Features. The oven control has a factory preset
built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and
59 minutes. The oven can be programmed to override this feature for Continuous Baking.
To set control for continuous baking:
1. Press and hold
Timer
Set/Off
pad for 10 seconds. After 10 seconds "
12h
" or "
- -h
" will appear in the display and the control will beep once.
2. Press
or
pad to switch between the 12 Hour Energy Saving and continuous bake features. Note: "
12h
" in the
display indicates the control is set for the 12 Hour Energy Saving mode and
"- -h"
indicates the control is set for the
Continuous Bake feature.
3. Wait 5 seconds to accept the change (display will return to time of day) or press
STOP
Clear
pad to reject the change.
To Set Control for Oven Lockout (some models):
The
STOP
Clear
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven doors and
prevents the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The
ovens can be locked individually.
To activate the Oven Lockout feature
Press and hold
STOP
Clear
pad for 3 seconds. After 3 seconds a beep will sound, "
DOOR
", "
LOCKED
" will flash and "
Loc
", the
oven icon, "
UPPER
" and
will appear in the display. Once the oven door is locked the "
DOOR
" and "
LOCKED
" indicator will
stop flashing and remain in the display.
To reactivate normal oven operation:
Press and hold
STOP
Clear
pad for 3 seconds. A beep will sound. The oven icon, "
UPPER
", "
LOC
" and
will disappear from the
display. "
DOOR
" and "
LOCKED
" will flash in the display until the oven door has completely unlocked. The wall oven is again
fully operational. Note: Because you can set the oven lockout individually, the lower oven can be used when the upper oven
lockout feature is on.
NOTICE :
The illustrations and instructions contained in this document only refer to the upper oven operations.
Before every operations, you must select the proper oven which will be in use. All these instructions can also be
applied to the lower oven by selecting the Lower Oven Pad on the right hand side of the control panel.
