8
Control Pad Features
Note:
The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also,
pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
For a silent control panel:
The
Delay
Start
pad controls the Silent Control Panel feature. The Silent Control Panel feature allows the oven control to be
operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and
later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control operation
1.
Press and hold
Delay
Start
pad for 6 seconds. A beep will sound, "
--:--
" will appear, "
UPPER
" and "
DELAY
" will flash in the
display. After 6 seconds, a beep will sound and "
SP
" (speaker) will appear in the display.
2.
Press
or
pad to switch between normal sound operation and silent operation mode.
If "
SP
" appears, the control
will operate with normal sounds and beeps. If "
- -
" appears, the control is in the silent operation mode.
3.
Wait 5 seconds to accept the change or press
STOP
Clear
pad to reject the change.
Temperature Conversion
(Fahrenheit / Celsius)
The
Broil
pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens
will be changed at the same time.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
1.
Press
Broil
pad and hold for 6 seconds. A beep will sound, "
---
" will appear
"UPPER"
and
"BROIL"
will flash in the display.
After 6 seconds a beep will be heard and "
F
" or "
C
" will appear in the display. If "
F
" appears, the display is set to show
temperatures in Fahrenheit. If "
C
" appears, the display is set to show temperatures in Celsius.
2.
Press
or
pad to switch between Fahrenheit or Celsius display modes. The display will show either "
F
" or "
C
".
3.
Wait 5 seconds to accept the change or press
STOP
Clear
pad to reject the change.
COOK TIME
PAD
Used to
enter the length
of the baking
time.
CLOCK
SET PAD
Used to set
the time of
day.
UP and DOWN ARROWS PADS
Used
along with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time
of day, clean time and minute timer.
TIMER SET/OFF PAD
Used to set or cancel the minute timer. The minute
timer does not start or stop cooking. Also, TIMER SET/OFF Pad is used to
set the Continuous Bake Feature.
DELAY START PAD
Used to
set the desired start time for
baking or cleaning. May be
used with COOK TIME to
program a delayed bake cycle.
OVEN INTERIOR
LIGHT PAD
Used
to turn oven
interior light ON
and OFF.
BROIL PAD
Used to
select the
variable broil
function.
BAKE PAD
Used to
select the
bake
function.
Select
Clean
STOP
Clear
Oven
Lockout
3
Broil
Warm &
Hold
Bake
Cook
Time
Delay
Start
Cook
Time
Delay
Start
Upper Oven
Lower Oven
STOP
Clear
Oven
Lockout
3
Broil
Warm &
Hold
Bake
Timer
Set/Off
Add 1
Minute
Select
Clean
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED
Select Clean Pad
(some models)
Warm &
Hold Pad
(some
models)
Stop
Clear
Pad
Delay Start
Pad
(some
models)
Oven
Light
Pad
Bake
Pad
Broil
Pad
Cook Time Pad
(some models)
ADD 1 MINUTE PAD
Used to add 1
minute to the Timer Countdown. This
feature works with the Kitchen Timer only
and does not affect any cook time or start
time functions (some models).
STOP CLEAR PAD
Used to clear any function previously
entered except the time of day and minute timer. Press
STOP CLEAR to stop cooking. Also the STOP CLEAR
pad is used to activate oven lockout setting.
SELECT SELF-
CLEAN PAD
Used to select
the Self-Cleaning
cycle. A 2, 3 or 4
hour Self-Clean
time may be
selected.
WARM &
HOLD PAD
Used to set
the Warm &
Hold
feature.
