Kenmore 721.7603 series, Руководство по установке

Страница: 11 / 28

INSTALLING THE RANGE
11
ENGLISH
ASSEMBLING THE SURFACE
BURNERS
DO NOT operate the burners without all parts in
place.
CAUTION
Place the burner caps and heads on the cooktop. Make sure
that the caps and heads are placed in the correct locations.
There is one small, one medium, one large and one extra
large burner head and cap.
Center Burner
(on some models)
Oval (Center) Burner
Head/Cap Assembly
Medium
burner
head and
cap
Large burner
head and cap
Small burner
head and cap
Extra large burner
head and cap
(on some
models)
(on some
models)
Front of range
(on some models)
Medium burner
head and cap
Hole
Electrode
Make sure the hole in the burner head is positioned over the
electrode.
CHECKING IGNITION OF
SURFACE BURNERS
ELECTRIC IGNITION
Select a top burner knob and simultaneously push in and
turn to the “
LITE ” position. You will hear a clicking sound
indicating proper operation of the spark module.
Once the air has been purged from the supply lines,
burner should ignite within 4 seconds. After burner ignites,
rotate knob out of the “
LITE ” position. Try each burner in
succession until all burners have been checked.
qUALITY OF FLAMES
The combustion quality of burner flames needs to be
confirmed visually.
A Yellow flames – Call for service.
B Yellow tips on outer cones
–
This is normal for LP gas
C Soft blue flames –
This is normal for natural gas
With LP gas, some yellow tipping on outer cones is normal.