Kenmore 721.7603 series, Инструкция по использованию и уходу

Страница: 40 / 96

40
CARE AND CLEANING
Before Starting SELF CLEAn
Do not hand clean the
oven door gasket
Hand clean the door
y
Remove the oven racks, broiler pan, broiler grid, all cookware,
aluminum foil or any other material from the oven.
y
The kitchen should be well ventilated to minimize the odors
from cleaning.
y
If the Self Clean cycle is running on one oven, the other oven
cannot be used.
y
Wipe up any heavy spillovers on the bottom of the oven.
y
Make sure that the oven light bulb cover is in place and the
oven light is off.
y
The oven light cannot be turned on during a Self Clean cycle.
The oven light cannot be turned on until the oven temperature
has cooled below 500˚F (260˚C) after a Self Clean cycle is
complete.
y
Fine lines may appear in the porcelain because it went
through heating and cooling. This is normal and will not affect
performance.
NOTE
y Clean the frame of the oven and door with hot soapy water.
Rinse well.
y Do not clean the oven door gasket. The oven door gasket is
made of a woven material that is essential for a good seal.
Care should be taken not to rub, damage, or remove this
gasket.
y Do not open the oven door until the Self Clean cycle is
complete.
y The oven door can become extremely hot. Do not touch the
oven door until it has cooled down.
y You may see some smoke and smell an odor the first few
times the oven is cleaned. This is normal.
y As the oven heats, you may hear sounds of metal parts
expanding and contracting. This is normal.
y A Self Clean cycle cannot be started if the Lockout feature is
active.
Setting Self Clean
1
Press SELF CLEAn .
The oven defaults to the recommended three-hour Self Clean cycle
for a moderately soiled oven. Press twice for a two-hour Self Clean
cycle and three times for a four-hour Self Clean cycle.
2
Press STArT .
Once the Self Clean cycle is set, the oven door will lock automatically
and
m
will display. You will not be able to open the oven door until the
oven has cooled. The lock will release automatically when the oven has
cooled.
DO nOT force the oven door open when m is displayed. The oven
door will remained locked until the oven temperature has cooled.
Forcing the door open will damage the door.
CAuTION
Setting Self Clean with a Delayed Start
(example: set for 3:00 AM/PM)
1
Press SELF CLEAn .
The oven defaults to the recommended three-hour Self Clean
cycle for a moderately soiled oven. Press twice for a four-hour
Self Clean cycle and three times for a two-hour Self Clean cycle.
2
Press DELAY STArT .
3
Use the keypad to enter the time of day that you would like the
oven to start the Self Clean cycle (ex. 3, 0, 0 ).
NOTE
The Delayed Self Clean start time can only be set 11 hours and 59
minutes ahead. To set for 12- 24 hours in advance, see the Setting
the Clock Mode section.
4
Press STArT .
Once the self clean is set, the oven door locks automatically and m
displays. You will not be able to open the oven door until the oven
has cooled. The lock will release automatically when the oven has
cooled.
NOTE
It may become necessary to cancel or interrupt a Self Clean
cycle due to excessive smoke or fire in the oven. To cancel the
Self Clean function, press the
UPPEr or LOWEr STOP button.
After Self Clean
y
You may notice some white ash in the oven. Wipe it off with a
damp cloth after the oven cools.
y
If the oven is not clean after one cleaning cycle, repeat the
Self Clean cycle.
y If the oven racks were left in the oven and do not slide
smoothly after a cleaning cycle, wipe racks and rack supports
with a small amount of vegetable oil to make them glide more
easily.