13
12
WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from
vacuum cleaner suddenly starting.
TO REMOVE BELT
TO REPLACE BELT OR
BRUSHROLL
Lay cleaner flat and flip cleaner to
expose nozzle base. Base should lay
flat and face up. To remove nozzle
guard, remove 6 screws.
Rotate/pivot the nozzle guard and pull
off.
Slide belt onto motor shaft.
Place new belt in area of brushroll
without bristles.
With new belt in place, pull and slide
brushroll into nozzle making sure that
the brushroll end caps are in the correct
orientation. Rotate brushroll manually to
make sure belt is properly aligned.
Reposition brush cover and 6 screws.
Tighten screws securely.
Lift and remove brushroll. Dispose of
old belt.
Nozzle
Guard
Motor
Shaft
①
②
③
BELT OR BRUSHROLL REMOVAL AND REPLACEMENT
