7
ENGLISH
2
1
Please pay special attention to these hazard alert boxes, and follow any
instructions given.
WARNING
statements alert you to such dangers as fire,
electric shock, burns and personal injury.
CAUTION
statements alert you to
such dangerous personal injury and/or property damage.
ASSEMBLY INSTRUCTIONS
WARNING
Electrical Shock Hazard
Do not plug into the electrical
supply until the assembly is
complete. Failure to do so could
result in electrical shock or injury.
CAUTION
Do not overtighten.
Overtightening could strip the
screw holes.
Do not operate the vacuum cleaner
without the screws in place.
1. Stand the vacuum upright and slide
the base of the handle firmly into the
grooves at the top of the vacuum body.
2. Check to be sure the handle is fitted
to the vacuum body. If there is a
gap, continue to push firmly until the
handle is flush.
3. Tighten securely with a screwdriver.
Place the pet handimate on the front of
the handle and push back to snap into
place as shown.
HANDLE ASSEMBLY
PET HANDIMATE PLACEMENT
HOSE ASSEMBLY
1. Align tabs on end of hose with slots
in edge of hose attachment hole on
back of vacuum. Push hose end in
and turn clockwise to lock into place.
2. Slide the end of the hose wand onto
the hose wand base.
Note:
The vacuum will not operate
properly unless the hose wand
is firmly attached.
3. Snap the hose into the hose clip on
the back of the vacuum handle.
4. Attach the lower cord wrap by lining
up the tab on the base with the
corresponding notch on the back of
the vacuum and turn it clockwise as
shown.
1
4
3
2
