TEST MODE
A WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before
servicing, unless testing requires power.
Continuous Run Mode
How to Enter:
Buttons to press to enter test
Dry Level + Chime
7 Sec
Dryer Status for test
Power On State
(Normal User Mode)
Test Mode
Continuous Run Mode
Continuous Run Mode:
1. Press "Dry Level" + "Chime” for 7 seconds during Power On 5tate(Normal User Mode).
2.
Once in Continuous Run Mode, 7-Segment will toggle display "cc" and the remaining time.
3.
The previous cycle will restart during Continuous Run Mode until Continuous Run Mode is
disabled.
4.
During Continuous Run Mode, press "Dry Level"
+
"Chime" for 7 seconds to return to Normal
User Mode. 7-segment will no long display "cc" and only display the remaining time.
Service Mode
Service Mode:
This mode is composed to Sensor Bar Touch Data Display Mode and Cycle Count Display Mode
and Software Version Display Mode. Those are Special Test Mode.
How to Enter:
1. Dryer must be on before Service Mode can be entered.
2.
Press 'Temp" and "Chime" Keys for 3 seconds, or until 3 beeps are heard.
3.
The machine will now be in Service Mode.
Sensor Bar Touch Data Display Mode
Definition of Sensor Bar Touch Data Display Mode:
1. This mode is default mode of Special Test Mode(lnitial Special Test Mode).
2.
Dryer will display Sensor Bar Data.
How to Enter:
This is same as a Service Mode.
Definition of Cycle Count Mode:
1. This mode is second mode of Special Test Mode.
2.
Dryer will display Cycle number.
How to Enter:
To enter Special Test Mode press While in Service Mode pressing the "Chime" key until the
control beep.
