TROUBLE SHOOTING
A
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before
servicing, unless testing requires power.
INSTALLATION OF 3 PRONG CORD
A.
External ground connector
B.
Neutral grounding wire (green/yellow)
C.
Center silver-colored terminal block screw
D.
Neutral wire (white or center wire)
E.
%" (1.9 cm) UL-listed strain relief
1. Loosen or remove the center terminal block screw.
2. Connect the neutral wire (white or center wire) of the power cord to the
center, silver-colored terminal screw of the terminal block. Tighten screw.
3. Connect the other wires to outer terminal block screws. Tighten screws.
4. Tighten the strain relief screws.
5. Insert the tab of the terminal block cover into your Dryer's rear panel slot.
Secure the cover with a hold-down screw.
W ARNING:
If converting from a 4-wire electrical system to a 3-wire, the ground strap must be reconnected to
the terminal block support to ground the Dryer frame to the neutral conductor.
INSTALLATION OF 4 WIRE CORD
A.
External ground connector
B.
Green or bare copper wire of power cord
C.
%" (1.9 cm) UL-listed strain relief
D.
Center silver-colored terminal block screw
E.
Neutral Grounding wire (green/yellow)
F.
Neutral wire (white or center wire)
Remove the External ground connector screw.
Connect the ground wire (green or unwrapped) of the power cord to the
external ground connector screw. If you want to connect B(Green or bare
copper wire of power cord) to the Neutral Post without assembling with
A(cabinet ground), call the service technician.
Loosen or remove the center terminal block screw.
Connect the neutral wire (white or center wire) of the power cord and the
appliance ground wire (green with yellow stripes) under the central screw
of the terminal block.
Connect the other wires to the outer terminal block screws. Tighten screws.
Tighten the strain relief screws.
Insert the tab of the terminal block cover into your Dryer's rear panel slot.
Secure the cover with a hold-down screw.
