4
PARTS INCLUDED WITH DOWNDRAFT
TOOLS NEEDED FOR INSTALLATION
Screwdriver
(Flat & Phillips)
Pencil
Tape
Measure
Drill
Sabre
Saw
Keyhole
Saw
-or-
1/4"
Nutdriver
Duct Tape
Wire
Stripper
Aluminum Grease Filters
(Qty. 2)
Parts Bag
(Contains leveling brackets
& mounting hardware.)
WARNING: Always disconnect electric power supply
before cleaning unit.
Use a mild detergent suitable for painted surfaces. DO NOT USE
ABRASIVE CLOTH, STEEL WOOL PADS, OR SCOURING POWDERS.
Vacuum blower to clean. Do not immerse blower in water.
Wash the 2 aluminum grease filters in a mild detergent solution or
a dishwasher. Remove them from the air vent by grasping the tab at
the top of each filter.
CLEANING
NOTE
The filters are different sizes. Be sure to replace them as removed
(wider one on the left), with tabs UP.
It may be necessary to remove the downdraft blower system from
the cabinet in order to service components such as the blower motor
or air vent mechanism.
Disconnect power to the cooktop and remove it first. Reverse the steps
under “MOUNT THE UNIT” to remove the downdraft from the cabinet.
WARNING: Always disconnect electric power supply
before servicing unit.
SERVICING
Содержание 233.5996 Series
Страница 23: ...23 ...