5-4
n
DIAGNOSTICS & TROUBLESHOOTING
Service Diagnostics (cont.)
Release both buttons when all user interface LEDs begin to flash
Note: If no button is pressed within 5 seconds then the product goes into the automatic diagnostic mode
used at the assembly plant. Each component is cycled for 5 seconds.
The Fast Ice button moves down through each step
Allow a few seconds for unit to register diagnostic mode
t,/Z>WKK>KZWKZd/KE
KE&/Ed/>
ϯϭ
EdZ/E'/'EK^d/DK
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ
ZĞůĞĂƐĞďŽƚŚďƵƚƚŽŶƐǁŚĞŶĂůůƵƐĞƌŝŶƚĞƌĨĂĐĞ>ƐďĞŐŝŶƚŽĨůĂƐŚ
EŽƚĞ͗/ĨŶŽďƵƚƚŽŶŝƐƉƌĞƐƐĞĚǁŝƚŚŝŶϱƐĞĐŽŶĚƐƚŚĞŶƚŚĞƉƌŽĚƵĐƚŐŽĞƐŝŶƚŽƚŚĞ
ĂƵƚŽŵĂƚŝĐĚŝĂŐŶŽƐƚŝĐŵŽĚĞƵƐĞĚĂƚƚŚĞĂƐƐĞŵďůLJƉůĂŶƚ͘ĂĐŚĐŽŵƉŽŶĞŶƚŝƐĐLJĐůĞĚ
ĨŽƌϱƐĞĐŽŶĚƐ͘
dŚĞDĂdž/ĐĞďƵƚƚŽŶŵŽǀĞƐĚŽǁŶƚŚƌŽƵŐŚĞĂĐŚƐƚĞƉ
ůůŽǁĂĨĞǁƐĞĐŽŶĚƐĨŽƌƵŶŝƚƚŽƌĞŐŝƐƚĞƌĚŝĂŐŶŽƐƚŝĐŵŽĚĞ
To exit manual diagnostics mode, without stepping through all the components, press the On button.
NOTE:
After 20 minutes with no key presses, the product exits diagnostic mode and turns off, then starts
back to running.
t,/Z>WKK>KZWKZd/KE
KE&/Ed/>
ϯϮ
EdZ/E'/'EK^d/DK
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ
dŽĞdžŝƚŵĂŶƵĂůĚŝĂŐŶŽƐƚŝĐƐŵŽĚĞ͕ǁŝƚŚŽƵƚƐƚĞƉƉŝŶŐ
ƚŚƌŽƵŐŚĂůůƚŚĞĐŽŵƉŽŶĞŶƚƐ͕ƉƌĞƐƐƚŚĞKŶďƵƚƚŽŶ͘
EŽƚĞ͗ĨƚĞƌϮϬŵŝŶƵƚĞƐǁŝƚŚŶŽŬĞLJƉƌĞƐƐĞƐ͕ƚŚĞƉƌŽĚƵĐƚ
ƚƵƌŶƐŽĨĨ͘