COMPONENT ACCESS
n
4-11
Machine Compartment Components (cont.)
cONdENsaTE pump rEmOvaL
1. Unplug ice maker or disconnect power.
2. Remove hose clamp. See
Figure 30
.
FIGURE 32
3. Remove line cord retainer and chassis ground wire.
See
Figure 33
.
FIGURE 33
raisiNg caBiNET TO accEss cOmpONENTs
1. Unplug ice maker or disconnect power.
NOTE:
To replace compressor, condenser fan motor/blade
or hot gas defrost valve raise the cabinet off the base.
2. Remove the 2 base screws. See
Figure 32
.
3. Unplug the ice maker plug from the condensate pump.
See
Figure 30
.
4. Remove 4 screws indicated by arrows. See
Figure 30
.
5. Pull the condensate pump out of the machine
compartment. Remove the vent tube hose clamp.
See
Figure 31
.
FIGURE 31
hOsE cLamp
FIGURE 30
hOsE cLamp
icE
makEr
pLug
