6
7
OPERATING YOUR COFFEE MAKER
OPERATING THE CONTROL PANEL
OPERATING YOUR COFFEE MAKER
BREWING COFFEE
3. Place a #4 paper filter into the brew
basket (see Fig 5).
4. Add ground coffee. The amount of
coffee you use is a matter of personal
taste. (We recommend one heaping
tablespoon for every two cups).
Experiment with different amounts of
ground coffee per cup until you brew
your perfect cup of coffee.
5. Close the cover. Place carafe on the
warming plate and plug in the
appliance. The time flashes at
12:00 AM in the Control Panel Display.
The clock does not have to be set to brew coffee. To set the clock time,
see “SETTING THE CLOCK, TIMER AND AUTO-BREWING”.
6. Turn on the coffee maker by pushing the “Start/Stop” Button (see Fig. 6).
The Green “POWER” LED will illuminate and the coffee maker will begin brewing.
After a few seconds, hot water flows into the filter to brew coffee. When the water
stops flowing, brewing is complete, and the coffee maker automatically switches to
the warming mode. For delayed brewing, see SETTING THE CLOCK, TIMER AND
AUTO-BREWING.
PAUSE AND SERVE FEATURE
The pause and serve feature enables you to remove the carafe from the Coffee maker
and pour a cup of coffee before brewing is finished. When the carafe is removed, a
special valve stops the flow of coffee from the brew basket to the carafe. Brewing does
not stop. IMPORTANT: If the carafe is not replaced under the brew basket after
20 seconds, water and coffee will overflow from the brew basket.
SETTING THE CLOCK, TIMER AND AUTO-BREWING
Use the Hour and Min Buttons to Set the Clock:
1. When the coffee maker is first plugged in, the clock will flash the default
time of 12:00 AM.
2. Press the Hour button to change the setting to any hour number between
12:00 am to 11:00 pm.
3. Press the Min button to change the setting to any minute number between 1 and 59
4. You can make the hours and minutes move more quickly in the clock display by
holding the buttons down.
5. The clock will begin keeping time at the moment the Hour and Min buttons are
released.
Use the Prog, Hour and Min Buttons to Program an Automatic Brew Time:
1. First set the clock. See directions above. Perform steps 1 through 5 under
BREWING COFFEE.
2. Press the Prog button.
3. Set the time you wish the coffee maker to begin brewing by pressing the “Hour” and
“Min” buttons. Be sure to set the correct designation of AM or PM.
4. Once you have set the correct time to begin the automatic brewing and the clock
has returned to the time of day, press the Auto On button.
5. The Auto Brew can be cancelled at any time by pressing the Auto On button a
second time. The Auto light goes out. To check what time the Auto Brew is set
for, push in the Set Auto button and the time will be displayed.
7. When you have poured out all the coffee in the carafe, press the “Start/Stop”
button to turn off the appliance, and remove the carafe from the warming plate.
NOTE: If the coffee maker is not turned off, it will automatically shut itself off after
two hours.
Fig. 5
Prog
Hour
PM
AUTO
POWER
Start/Stop
Min
Auto
Fig. 6
