CAM Control
Kendrion Kuhnke Automation GmbH
104
17 May 2021
5.1.4 Kuhnke FIO CAM Control
There is a separate instruction manual available for Kuhnke FIO CAM Control from the FIO range.
For further information, please click the link below.
Link to the documentation:
http://productfinder.kuhnke.kendrion.com/de
Technical Data
Type
Kuhnke FIO CAM Control
Cam tracks (outputs)
24 x 0.5 A (dead time compensation 1 to 5000 ms) & 8 software tracks, 8
cams per track
Total output current I
tot
4.5 A
Inputs
1x 24 VDC, 1 ms, 4x 24 VDC or 0...10 V (configurable)
Encoder interface
incremental 24 VDC, A, B, Ref., absolute via CAN or EtherCAT
Cam programs
32
Cycle Time
20 µs
Max. speed
1000 rpm (@ 1° resolution)
Fieldbus port
EtherCAT® 100 Mbps LVDS: E-bus
Installation
35 mm DIN rail
Signal indication
LED located next to the terminal
Shield
Provided directly by the module
Terminals
Spring-assisted combi plug w/ mechanical ejector
Ambient conditions
0 °C…+55 °C, IP 20, immunity to noise: Zone B to EN61131-2
Housing (W x H x D)
aluminium frame, plastic 25 x 120 x 90 [mm]
Approval
CE, cULus