Kendrion Kuhnke Automation GmbH
Construction and Functionality
Econo
71
Rotate
Panel Rotate allows you to set by how much the screen will be rotated. Changes will apply immediately but
will not be saved. To permanently save the settings, go to screen Permanent Registry, Store, see section
7.1.6 Saving the Settings: "Permanent Registry, Store".
7.1.6 Saving the Settings: "Permanent Registry, Store"
Assuming you make changes to the system settings such as the touch screen calibration or the IP address,
you are recommended to permanently save them to the device in order to be able to retrieve them when
booting the unit.
Run F&S Board Config to save the system registry.
Go to the Registry tab and tap on Save Registry.
This will store the data to the device without displaying a confirmation.
A confirmation prompt will appear after a short while.