www. kenall.com P: 800-4-Kenall F: 847-360-1781 1020 Lakeside Drive Gurnee, Illinois 60031
3
INSTALLATION INSTRUCTIONS
CDL6VL2_F-5507_110514
Figure 5
Figure 6
III. Electrical Connection
• MAKE SUPPLY AND (OPTIONAL) 0-10V DIMMER
CONNECTIONS PER THE WIRING DIAGRAM BELOW.
• CAP GRAY/ VIOLET LEADS IF DIMMER IS NOT
CONNECTED.
NOTE:
If using a dimmer, Kenall recommends the
Leviton
®
IllumaTech
™
IP710 series dimmer or the
Grafik Eye GRX-TVI Control Interface for 0-10V control
and switching capability. Contact Kenall for suitability
of using an alternate sink-type 0-10V dimmer.
• Connect power and test for proper operation of
luminaire. Make sure all LEDs are lit and dimming
operation works as intended (if connected).
IV. Conclusion of Luminaire Mounting Procedure
• Install trim (shipped separately) into frame opening.
Attach trim to frame using (4) captive fasteners.
