background image

www.kenall.com  |  P: 800-4-Kenall  |  F: 262-891-9701  |  10200 55th Street Kenosha, Wisconsin 53144, USA         

This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents 
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co. 

1

INSTALLATION INSTRUCTIONS

LTL_F-5595_091118

B

C

D

DETAIL  B

SCALE 1 / 5

DETAIL  C

SCALE 1 / 5

DETAIL  D

SCALE 1 / 5

END

MIDDLE

HOUSING

STARTER

HOUSING

FIGURE 5

1/4-20" SREWS

END PLATE

LOCK 

WASHER

MIDDLE HOUSING

1/4-20" SCREWS

LOCK WASHER

LOCK WASHER

1/4-20" SCREWS

Luminaires for Tunnel Applications

LUXTRAN

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be followed, including the following:

 

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION 

CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND 

THE HAZARDS INVOLVED. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION 

PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT 

AINSI QUE LES RISQUES INHÉRENTS. DISCONNECT POWER TO ALL CIRCUITS BEFORE WIRING FIXTURE. INSTALL IN 

ACCORDANCE WITH ALL NATIONAL, STATE, AND LOCAL CODES. DO NOT CONNECT TO AN UNGROUNDED SUPPLY. READ ALL 

FIXTURE MARKINGS AND LABELS TO ENSURE CORRECT INSTALLATION OF FIXTURE. SUPPLEMENTAL INSTRUCTIONS MAY BE 

LOCATED ON THE FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET, REGARDING ORIENTATION, OR MOUNTING RESTRICTIONS. 

 

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

LTL SERIES

1.  Rotate latches and open door.
2.  Remove air-craft cables and remove door(s) completely. 
3.  Secure fixtures to wall or ceiling using user supplied hardware.  1.43” x .43” slots in mounting brackets are 

provided.

The LuxTran LTL series luminaires contains sensitive electronics. Take care to avoid damage by improper handling or 

static electricity discharge (ESD). Either type of damage could render the system inoperable or cause latent failure. 
LuxTran LTL Series Luminaires are powered by RD700 distributed DC driver system; remotely-located for servicing 

convenience.

FIGURE 1

DETAIL  A

SCALE 1 :3

A

17.00 (5x)

 10.00

 1.43

 .43

Figure 2

Figure 1

Row Mount View

Отзывы: