Ken 59.480, Инструкция по эксплуатации

Страница: 37 / 44

Section/page:16.3
Parameters
KEN DW 412
Subject to alterations 17/9/2013
-adjustments of the machine, continued
Description
Adjustments
from factory Possible
adjustments
User adjustments
Sensor for chemical, rinse aid
Sensitivity of the level sensor for measuring
the rinse aid. This parameter is as a
standard set to 50% and kan be changed if
detecting the rinse aid is causing problems.
50% 0-100%
Communication, NetCom
Indicates whether the machine is connected
to TCP/IP network.
No Yes
No
IP Adress
IP adress to TCP/IP network.
000.000.000.000
Daily check?
Indicates whether a daily procedure for
checking the machine is to be carried out.
No Yes
No
Time for daily check
Number of hours when daily check is to be
carried out.
0 0-23
Slow water filling
Indicates how long (in minutes) a water fill
can last before a warning is displayed.
4 0-99
No water filling
Indicates how long (in minutes) a water fill
can last before an error is displayed.
5 0-99
Adjustment of detergent dosing
Conductivity Conductivity
Time control
External
Hood motor
Indicates type of the hood motor.
230 V 12 V
230 V
Eco-adjustment
Yes Yes
No
Drain after low level
When a machine with drain pump is
emptied, this parameter indicates how long
(in seconds) the drain pump must run after
the low level sensor is activated.
30 0-999
Autostart
Indicates whether if autostart of the
machine is on.
No Yes
No
Autostart time
Indicates time for autostart.
00:00 00:00 - 23:59
Autostart days
Indicates which weekdays the machine is to
do autostart.
No days All weekdays