Ken A Vision Video Flex 7200HD, Инструкция по эксплуатации

Страница: 4 / 12

4
Introduction
Thank you for your purchase of a Ken-A-Vision Video Flex
®
7200HD camera!
You have acquired a high resolution solution to any presentation need, be it
classroom or conference room. Images captured by your camera will be
transmitted directly to computer and through your computer to a Projector,
DVR, Flash Drive or other digital device. The 7200HD is a high definition dig-
ital device designed to connect via a single USB cable.
Package Contents
If any components are missing, please contact your authorized Ken-A-Vision
®
dealer.
Setting up your Video Flex 7200HD
1. Connecting the Video Flex to an Output Device:
Prior to connecting the USB cable, you must first install the supplied software.
Please see the Applied Vision™ Software booklet provided with the enclosed
software CD.
Once the software is loaded onto your computer, connect the USB cable to the
computer with the standard USB plug. Click on the Applied Vision desktop
icon to launch the software, and follow on-screen instructions. The
camera should show an image on your computer screen. See Applied
Vision™ Software Manual if there are any problems with an image. You are
ready to go!
Note
1
: The USB connection alone provides enough power to operate the
7200HD, and no additional power is required.
• Video Flex 7200HD Camera
• Pre-attached USB Cable
• 28mm Microscope Eyepiece Adapter
• Applied Vision™ Software CD
• Applied Vision Manual
• Video Flex Instruction Manual