Ken A Vision Video Flex 7200HD, Инструкция по эксплуатации

Страница: 10 / 12

10
Camera complies with Class A and B, part 15 of the FCC Rules.
Use only Ken-A-Vision Video Flex parts. Failure to use non-Video Flex parts will
void your warranty.
INFORMATION TO THE USER Changes or modifications not expressly
approved by the party responsible for compliance could void the user's author-
ity to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with instructions,
may cause harmful interference to radio communication. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio reception which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: Reorient
or relocate the receiving antenna and/or increase the separation distance
between the equipment and the receiver, and/or connect equipment into an
outlet on a circuit different from that which the receiver is connected; and/or
consult your dealer or experienced radio/ TV technician for help.
Ken-A-Vision reserves the right to make design improvements and other changes in accordance with the
latest technology. There is no obligation to make changes in products already manufactured. Patents
Pending Copyright 2013 Ken-A-Vision Corporation