X8 MIG WELDER
2.4 Operation
2.4.1.2 Wire feeder control panel
The control panel of the wire feeder has a one-knob navigation and push buttons for selecting parameters or
values. You can, for example, adjust the welding parameters and save settings on memory channels.
Wire feeder navigation
The three main views on the wire feeder display are the same as in Control Pad:
Channel
,
Welding
, and
Settings
.
Note:
You can press the
Power
button to lock the wire feeder and avoid starting welding accidentally.
The wire feeder has a memory channels button on the left and the
Settings
button on the right side of the
display. Press these buttons to change the view on the wire feeder's display. Press the button again to return
to the
Welding
view.
Use the knobs under the display to move focus in the display and to adjust the values. When there is a green
light in the center of the knob, the knob also functions as a push button.
In the
Welding
view, adjust the welding power with the left knob and the fine tuning with the right knob. In
most welding processes, this secondary parameter is voltage.
In all other views, move up and down in the menus with the right knob. Press the green button in the center
of the knob to open an item.
Wire feeder views
Welding view
In the
Welding
view, you can:
• See an overview of the settings of the selected welding program
• Adjust the main parameters (welding power and fine tuning)
OPERATING MANUAL | EN
96
©
KEMPPI | 2018-09-28
